Home » Impression Materials » UltraFit: Cartridge Impression Material
UltraFit: Cartridge Impression Material
UltraFit –Cartridge is a putty-like, addition-curing, viscous silicone impression material. UltraFit - Cartridge is compounded for taking exact impressions. The material functions as a hand mixed putty with added advantage of compressing the material with hand after injecting for precise impression.
|Working time (min.)||2:00±0:10 |
(After the mix)
|Recommended cast time (min.) || 3:30±0:20|
|% Linear shrinkage after 24h. || = 0.1|
|% Elongation @ break || not determined|
|% Recovery from Deformation || 99.3|
|Hardness Shore A || 32 - 34|
The times and properties are valid at room temperature and Relative Humidity.
The UltraFit impression material is a type 1 high viscosity silicone material filled in special auto mix cartridges. It can be directly extruded onto the desired mold.
Storage and Shelf-Life
This material should not be used after the expiration date. Store at = 78 ºF and away from sunlight.
Safety and Handling
For specific information regarding safe handling of this material, please refer to the Material Safety Data Sheet. Keep away from children. This material should be used for impression purposes only.
Cartridge, 50 ml. PRODUCT # E5010 – 32NC
- Use special colored mixing tip and special dispenser gun to extrude the material onto desired mold.
- Allow to 6 minutes for curing before removing the impression.
Northeast Resins & Silicones, LLC assumes no liability for intentional or unintentional misuse of this product.